Follow these steps in thew given order to pair your radiator with the app and the Wi-Fi network
BEFORE STARTING
Before you start the pairing procedure in the app, you need to follow these steps:
(Click on the blue text to go to the user guide and video tutorials section)
- Download the IRSAP NOW application. The app is completely free and can be downloaded from the App Store or Play Store.
- Register an account in the app
- Accept all consent requests
- Configure a home in the app
- Complete the pairing procedure in the app (follow the steps below or watch the video tutorial at the end of this article)
PAIRING IN THE APP
Follow the steps below in the given order to pair your radiator with the App and the Wi-Fi network:
IMPORTANT: Make sure that the power supply cable is connected to the mains and that the LED on the keypad is solid red.
- Open the IRSAP NOW application and select in this order Menu → Devices → Blue '+' button → Add WiFi radiator
- Select "Login" to connect your smartphone to the WiFi network of the IRSAP_R(D/L)_alphanumeric code radiator
- The message "Device found" confirms that the pairing between the smartphone and the radiator has been carried out correctly.
- Select the WiFi network to which you want to connect the radiator → enter the password → Connect.
- One long "bip" and a purple flashing light indicates that the pairing process has started. 2 bips and the LED switching off confirms that the pairing was successful.
- Select the room where the device will be installed or create a new room.
- The radiator will appear in the "Devices" section of the application.
** it may occur that at this point, a firmware update message will appear: in this case, do not close the app or disconnect the radiator, let the update finish and then select the network IRSAP_R(D/L)_alphanumeric code again.