Sometimes an error screen will appear during the pairing process.
Sometimes an error screen will appear during the pairing process.
In this case, press the "Retry" button after moving closer to the radiator. Otherwise, you can use the MANUAL PAIRING procedure.
- Select in this order Manual pairing → Other settings
- Open the WiFi settings on your smartphone (without closing the application) and connect to the WiFi network IRSAP_R(D/L)_alphanumeric code
- Wait until the message "no connection" appears near the Irsap WiFi network. Then go back to the app and press on "Done".
- Select the WiFi network to which you want to connect the radiator -> Enter the password -> Connect;
- One extended "bip" and a flashing PURPLE light indicates that pairing has started. 2 "bips" and the light switching off indicates that the pairing was successful.
- Select or create the room in the house where you wish to install your radiator.
- The radiator will appear in the Devices screen of the application.