A system can be set in summer mode when the purpose is to cool the room.
For cooling it is necessary that at least one Smart Thermostat or Starter has the relay mode enabled for a 'Heat Pump' or 'Fancoil' system: the operation of the system is then inverted, and the generator is activated when the detected temperature exceeds the offset indicated in the app.
| The following devices cannot be used for cooling | ... as in summer mode: |
| Smart Valve | continue to modulate when open and closed |
|
Smart Thermostat with
|
if not wired to cooling devices, it does not activate the generator |
|
Starter with
|
if not wired to cooling devices, it does not activate the generator |
|
Electric radiator (all WiFi smart models) |
are turned off and do not switch on. |
When the Summer mode is selected, schedules are changed: time slots and temperatures set for the Winter season are hidden, and new temperatures (the 'Overheating Protection' temperature can also be changed) and new time slots should be created. (instead of cooling the house)
If the purpose is to switch off the system, instead of cooling the house, read here.